ACCESSORIES AND UPGRADES
REMOTE INTERFACE UNIT​
​
A perfect upgrade to your existing DTM-151-S Digital Teslameter. With the RIU-800, user can now monitor their DTM operation from a distance (80 meters maximum using a Group3 FOR). This interface unit connects via the serial output of your existing DTM-151-S model teslameter and coupled with a Group3 FTR port to Group3 FTR using Group3 simplex fibre optic cables. It's basically an extension of your display plus more features at your fingertips.
This is a very convenient accessory for users that would like to operate their teslameter away from the magnet or sample being measured. Perform data logging, monitor reading via graph, check field and temperature or operate your DTM-151 from a distance with the RIU-800 interface.
​
Specifications:
​
-
remotely control your DTM-151-S using fibre optic cables up to 80 meters (with FOR) using the tablet's touch screen interface
-
perform data logging of field and temperature versus time
-
monitor stability through visual graph
-
connect to desktop computer using a LabView VI for DTM-151-S (over Ethernet)
-
easy access to useful hardware switches such as resetting, filtering ON/OFF and field unit (Gauss or Tesla)
-
network capable via Ethernet port
Need to know more?
​
​
Remote Interface Unit - RIU-800
LOOP CONTROLLER EXTERNAL ENCLOSURE FOR PCI EXPRESS APPLICATION
​
The PEX2PCIE4L PCI/PCI Express Expansion Chassis provides a quick and simple I/O expansion solution to almost any PCI Express (PCIe) enabled system. Adding PCI/PCIe cards to a server or workstation, or providing a platform to swap cards between a mobile and desktop setup is a cost-effective and time-saving solution for maximizing the I/O capabilities of your system.
The external expansion chassis adds two full-length (38cm) PCI slots (32-bit/33MHz), as well as two PCIe x1 (single-lane) slots to a host computer through a single PCI Express connection. Providing total bandwidth up to 250MBps from the PCIe x1 host controller card allows the computer to function as though the expansion chassis cards were connected directly to the motherboard.
-
Control the power state of connected PCI/PCIe cards with the self-powered chassis and easily accessible on/off button
-
Install additional cards without opening your computer with the provided external expansion card slots
-
Easy installation and support for small form-factor computers with an included low-profile/half-height bracket
​
​
FTR -Fibre to RS232 Adapter
​
The FTR is a small adaptor plug which provides bi-directional conversion between standard RS-232C serial ports and fiber optic cables. The device has a standard 25-way D-sub connector which can be connected to any standard RS-232C receptacle, and it accepts Hewlett-Packard snap-in connectors with plastic cored fiber optic cables up to 80 meters in length with the addition of a Group3 FOR.
The device is ideal for establishing noise-free data transmission between computers and peripherals, avoiding ground loops and errors caused by pick-up of transients and interference radiated from industrial equipment. The device also allows data transmission through the voltage gradients often found in ion beam equipment.
​
​
FOR -Fibre Optic Repeater
​
The FOR is a small adaptor plug which provides extension of optical signal from your FTR up to 80 meters. It comes in either plastic or glass optics.
The device is ideal for establishing noise-free data transmission between computers and peripherals, avoiding ground loops and errors caused by pick-up of transients and interference radiated from industrial equipment. The device also allows data transmission through the voltage gradients often found in ion beam equipment.
​
​
